Tissot Flyback Chronograph Settings Teach You How To Set The Time, Month, Date And Alarm

First, set the time

Crown in position III
Pull crown to position III; small second hand 8 stops immediately.
旋转 Turn the crown clockwise or counterclockwise to set the time. Then, push the crown back to position I (if your watch has a patterned crown, tighten it).
Important note: Whenever you set the time, you must synchronize the internal time that controls the alarm. (See below)

二 、 Set the date and time zone
 Crown in position II
旋转 Turn the crown clockwise or counterclockwise. Only the hour hand moves forward or backward by one hour. Quick time setting is useful when changing the time zone or when daylight saving time and winter time are alternated.
Note: The date can only be changed after midnight.
Important note: Whenever you set the time, you must synchronize the internal clock that controls the alarm. (See below)

三 、 Sync Settings
 Crown in position III
触发 Sequence trigger corresponding buttons:
A sync minutes
B sync hour
C Every click adjustment-hour
D Adjustment + hour per click
Important note: When you set the time or change the time zone, you must synchronize the internal clock that controls the alarm with the analog time displayed with the hands.
的 The steps for performing internal hour hand synchronization are as follows:

—When the small second hand (8) is at 60 seconds, pull the crown to position III (hand stop).
—Use button A to set the 60-second hand (4) directly above the minute hand (2).
—Then push the crown back to position I (if your watch has a screw-down crown, tighten it).
The internal hour hand is now synchronized.
Description: The fast synchronization method (useful for connective skin when changing time zone) is achieved by adjusting buttons +1 or -1 hours.
Important note: Before synchronizing the watch, check that the hands (3), (4) and chronograph hands (6) and (7) are in position 0 (12 o’clock), and then pull the crown to position II .– –